I would really like to get the cad and/or stl files. J
Michail Wilson 206-920-6312 From: [email protected] [mailto:[email protected]] On Behalf Of newxito Sent: Tuesday, November 5, 2019 5:35 AM To: neonixie-l Subject: [neonixie-l] Re: WordClock-2 with 2.3" displays Thanks for pointing out the HT16K33 issue with big displays! I’m currently designing a self-made 16 segment display. The limit of my 3D printer is 250mm (9.8”) but I will start with 140 x 100mm (5.5”). First, I wanted to use a HT16K33. After your comment, I thought to use some mosfet to increase the current. But finally, I've decided to use an ATmega328p in I2C slave mode and RGB 5050 LEDs. That needs a lot more current, but I think it’s nice to have full color control. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/ee153f14-e8c7-4bf5-b13e-3689b2f32ef9%40googlegroups.com <https://groups.google.com/d/msgid/neonixie-l/ee153f14-e8c7-4bf5-b13e-3689b2f32ef9%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/005e01d59404%2490e22f20%24b2a68d60%24%40com.
