That is looking awesome. Happy to wait until you are ready - especially if 
you are going for 15 or 16 digits.
Is that a two tube add-on board in the bottom of the picture?



On Friday, 13 December 2019 15:45:47 UTC, Mitch wrote:
>
> Richard, kits will be available soon after January 1st. Everything but the 
> tubes, case, and power supply will be included. For anyone who can't wait, 
> I can supply the main board, six tube boards, programmed microcontroller, 
> and two pushbuttons, for $50 plus shipping. Everything else is available 
> from the usual suppliers. The assembly manual is rough at this point, but 
> it should be sufficient while I improve it.
>
> After that, the B7971, then I'll look at a 16 digit version, or maybe 15 
> digits with some colons.It should be easy, just another HT16K33, some extra 
> driver chips, and a higher current capable power supply for the filaments.
>
>
>
> On Friday, December 13, 2019 at 9:56:44 AM UTC-5, Richard Scales wrote:
>>
>> That does look good - I need this in my life! Do you currently have plans 
>> for something with more than six tubes?
>>
>> On Tuesday, 26 November 2019 12:19:55 UTC, Mitch wrote:
>>>
>>>
>>>
>>> I was a little surprised that the power supplies worked the first time. 
>>> A LM2576 is used to drop the supply voltage to 5v. Two 34063 chips raise 
>>> that voltage to 32v, and lower it to 1.65v. The datasheet and online 
>>> calculators for the 34063s made that part easy.
>>>
>>> The next revision will use separate tube boards. Curiously the tubes I 
>>> have with 1990 date codes aren’t very bright. The 1987 versions are good.
>>>
>>> I can’t seem to find matching LEDs for the blue-green color, to use for 
>>> colons. Otherwise everything works as it should.
>>>
>>>
>>>
>>>
>>>
>>> [image: IMG-0185.jpg]
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/11c5e848-3fb2-43ae-9aa2-77e0a552b5be%40googlegroups.com.

Reply via email to