id be interested in the files if possible, i could use all the help to get my own projects going
On Saturday, October 7, 2017 at 10:24:00 PM UTC-7, gregebert wrote: > > Found this on ebay; not my listing: > http://www.ebay.com/itm/Sperry-Gas-12-Hour-Clock-Digital-SP-151-Nixie-Display-Tubes-Panaplex-/222652999099?epid=2232577033&hash=item33d72725bb:g:rVYAAOSwPe9ZtcgV > > The same seller also has a lot of 25 units for a really good price at the > moment. > > This is the same display I have in my nixie watch. It can be multiplexed > or direct-drive. You will need a PCB to solder to the display itself. > > OSH Park could probably do it for about $10 US per board. If there is > sufficient interest I can slice-off the display-driver board from my nixie > watch project and make the gerbers available. My design is direct-drive > with current-regulation on each segment, and a serial interface to control > the segments. The main drawback to my driver board is that some segments > are not controllable for general-purpose usage; it must be for a clock. The > lower-2 digits will display 0-59, and the upper will display 0-12. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/b70247e0-032f-4218-8820-5f31dbdd201e%40googlegroups.com.
