Those are basically wires. I use these: 
https://www.digikey.com/products/en?keywords=ed90101-nd. I would think that 
Harwin would make something similar.

I'm about to try them for a different planar display. Hopefully I can get 
them inserted without bending them all up. That would be a tragedy.

On Tuesday, March 24, 2020 at 4:22:09 AM UTC-4, Richard Scales wrote:
>
> The only thing I would say is that the pins on SP-101's are really thin, 
> they are lost in a 1.0mm pin socket. They are also lost in 0.75mm pin 
> socket. I just measured the diameter of one of the pins and it was about 
> 0.46mm which is super skinney.
>
>
> On Monday, 23 March 2020 20:36:11 UTC, martin martin wrote:
>>
>> I use the pin sockets I found on eBay.  They work well.
>>
>> https://www.ebay.com/itm/100-Nixie-IN-12-IN-18-receptable-pin-sockets-1-0mm/133366461097?hash=item1f0d42b2a9:g:l8oAAOSwk8RedLU0
>>  
>>
>>  
>>
>>
>>
>> ~
>> *mcve...@gmail.com*
>>
>>
>> On Mon, Mar 23, 2020 at 6:02 AM ZethieTail <zethi...@gmail.com> wrote:
>>
>>> im just trying to find sockets for my displays, but i dont really need 
>>> em i think, ill just go with individual pin sockets  or wiring up the 
>>> display directly to the pins, but if i design a board i hope i get the pin 
>>> layout right
>>>
>>> On Thursday, March 19, 2020 at 8:15:00 PM UTC-7, Richard Scales wrote:
>>>>
>>>> I am trying to get enough displays and sockets for a clock and i 
>>>> recognise the board in your photos. Are you (anyone else) willing to part 
>>>> with displays and sockets?
>>>>
>>>> On Saturday, 21 December 2019 14:51:31 UTC, Richard Scales wrote:
>>>>>
>>>>> Does anyone have any data on these Panaplex displays?
>>>>>
>>>>> I am particularly interesting in finding out what the specified 
>>>>> cathode currents are for the various parts of the display, colon, comma 
>>>>> and 
>>>>> decimal point might be?
>>>>>
>>>>> From digging around it seems that they are all in the micro amp region 
>>>>> - typically 300 micro amps for the larger sections though it would be 
>>>>> good 
>>>>> to know for sure.
>>>>>
>>>>> Also, has anyone made a board or have a 'footprint' that I could use? 
>>>>> I have measured one but it would be great if accurate data was available.
>>>>>
>>>>> Richard
>>>>>
>>>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "neonixie-l" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to neoni...@googlegroups.com.
>>> To view this discussion on the web, visit 
>>> https://groups.google.com/d/msgid/neonixie-l/dfff2a91-bacd-4037-a0ff-de1e52824d91%40googlegroups.com
>>>  
>>> <https://groups.google.com/d/msgid/neonixie-l/dfff2a91-bacd-4037-a0ff-de1e52824d91%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to neonixie-l+unsubscr...@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/113b22af-5f25-469e-acf7-d85bc4e9d425%40googlegroups.com.

Reply via email to