Just refining my query: Having thought about this a little more and only assuming that my pseudo code example is anywhere near correct, would anyone be able to suggest what the relative timings might be for the period that the static digits are displayed and the range of periods for the fading in and fading out digits?
Further more, might it be OK to display things in this order: Static Digits Fading In Digits Fading Out Digits or perhaps in this order: Static Digits Fading In DIgits Static Digits Fading Out digits or am I barking up the completely wrong tree! Richard On Friday, 1 May 2020 04:56:06 UTC+1, Richard Scales wrote: > > Hello everyone, > > I am contemplating having a go at implementing some form of digit cross > fade effect of which I have zero experience, knowledge or understanding and > I am hoping that someone could point me in the right direction. > > I can see that there are established designs using HV5622 drivers which > are capable of cross fading digits that change and I'd like to implement > this myself. > > I already use the blanking signal via a PWM signal to perform overall > fading of the display (all tubes) though the trick must be maintaining full > brightness for the digits that stay static whilst varying the brightness of > the incoming and outgoing changing digits. > > If this assumption is correct then I'm also going to assume that, even for > the digits that remain static - they cannot be on all the time and there > must be some 'off' time during which the changing digits can be faded. > > This all makes use of the persistence of vision thing that makes us think > that the display is static. > > If I'm still on the right track then I am guessing that there will be a > sufficient 'off' time for the static digits to allow the fading digits > (incoming and outgoing) to be presented at varying degrees of 'brightness'. > > In a very rough pseudo code kind of thing: > > > :start of transition > Set shift register for static digits, turn all digits on, wait long enough > for the 'full display' effect', turn all digits off > Set Shift register for outgoing digits only, turn on, wait long enough > though reduce this period during the course of the transition, turn all > digits off. > Set Shift register for the incoming digits only, turn on, wait long enough > for the digits to start appearing and increase this period during the > course of the transition, turn all digits off > Loop back to start until transition is complete > > Am I anywhere near close with this? > > Is there any published method? > > I have yet to point my scope at a working clock to investigate this > further - I currently have an inherent reluctance to do this following a > recent episode of clumsy probing resulting in the premature expiration of > the device that I was investigating :-( > > It's really just the concept that I would like to fully grasp, I find that > I can stare at sample code segments all day long and not make any > meaningful progress, though code segments are most welcome. > > All pointers gleefully received. > > Richard > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/b992e660-ed9b-42d6-85fe-554041ddab36%40googlegroups.com.
