Hi Everyone I want to make a 2 Digit Nixie Tube Counter that is battery powered with 3 buttons (+1,-1,Reset). pretty much want to create the same idea as below but i would design a case and condense it down,
[image: Magic: The Gathering Nixie Life Counter | Hackaday] I am digging around to try and find a guide to follow. I have zero experience in this whats so ever, but this seemed like an easy project to start with. What i am assuming I could do I is take an arduino project for a MTG life counter such as this ( https://cerkit.com/2018/09/16/building-a-magic-the-gathering-life-counter-with-arduino-and-max7219/) and replace the two digit segment displays with 2 Nixie tubes. what i am hitting for a roadblock is what exactly do i need to power and wire them up with a battery and only do 2 digits rather then a clock. I have currently IN-17 Tubes Arduino Micro Things I Think I need https://www.shop-tes.com/1363-hvps-vertical-high-voltage-low-noise/ (only power supply i can find that seems to step up low voltage to where i need it if you have some other suggestions let me know) 3.7V Lipo Lipo Charging circuit Nixie drivers (link to some would be awesome i see so many options not sure what would be best in terms of price and speed of shipping) I am not sure what am missing and is there maybe already out there a 2 digit socket board for IN-17 that i could use? And then the next step after sourcing everything would be how to wire it to the project i had linked above. thanks so much in advance hopefully this will be a good kickstart into the world of arduino and nixie tube projects -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/79d6cc8a-5f0a-47bb-9134-769d171bc01do%40googlegroups.com.
