Nice. Be good to see these
CheersIan
On Wednesday, 24 June 2020, 17:44:48 BST, Kevin A.
<[email protected]> wrote:
I've also been designing some nixie flyback power supplies lately. I will do a
full writeup on my website of the project when the project is complete.
I recommend these tools because I have experience with them and they work!
On Tue, Jun 23, 2020 at 4:22 PM MrThe50sanchez <[email protected]> wrote:
Hello Again, hope everyone is good!
I was trying to make a DC-DC booster converter using the LT1308B/A device, I
made a PCB for it, doing the same as the datasheet of this device says, but I
don´t get the High Votage, and that`s
why im here asking for help, I tried a lot of things put don`t know what it can
be.
This is the schematic I use (This one is from the datasheet) :
The PCB I made is the same as this schematic and using the same components, Im
using a rechargable battery CR2 800mAh 3.0V Li-on.
Any Ideas of what I can do to find what is going wrong?
*I have LBI and LB0 from the LT1308 Device not connected to anything.*/SHDN pin
is connected to Vin, Positive Voltage to It works.
*Because I want 180V output voltage I have resistor from FB R1 = 47K and R2 =
300 Ohm to get 1,21V Feedback.
*The capacitors Im using (10nF 250v) are not electrolitic, they are normal
ones.
Thankss Guys!
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/7d2fbb96-d88c-4341-b89a-2ab723f403dao%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/CALcVLKJ%3DedEpP%2Bc14ZQxXMn_zve3c0DKqzvQkU0Bkb4mYFuHeQ%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/635966145.5716215.1593019502907%40mail.yahoo.com.
