Well, if the schematic symbol for U1 is correct, this will be a 
"catch-on-fire" inverter, because the internal diode of the MOSFET will 
create a complete circuit thru the battery and inductor, leading to high 
enough current to overheat the inductor or battery.


Sarcasm aside, I think the intent is for U1 to be a NMOS with the drain and 
source/substrate connections reversed. Then it becomes a flyback converter. 
It looks like Q1 is in the circuit to provide faster shutoff of U1. You 
would need to run some SPICE simulations to make sure it's working as 
expected, and you would need a good model for the PIC output, such as an 
IBIS model.

This circuit has no feedback loop, so the output voltage will vary wildly 
with load. Theoretically, the output voltage will be infinite with no load, 
and a minimum of around 3V out at maximum load (battery voltage minus 
diode-drop).

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/3bc67531-15f4-4a15-9426-3652addde96bo%40googlegroups.com.

Reply via email to