Thank you BLKADDER, Bill, Richard S, Bill and Richard A. Your suggestions are well noted, and will be thoroughly considered. Best, Aiden
On Monday, October 12, 2020 at 6:04:06 PM UTC-7 Richard Arndt wrote: > My interest however is powering single digit IN-18 clocks from USB. The > nixie only requires 1.2W typical. Your NCH6100HV is a bit pricey and > overkill for my application. It would be nice if you could designed a low > power version that is less expensive. And yes, I do like option to > measure/control/shutdown HV from micro. > > Rich > > On Monday, October 12, 2020 at 3:52:38 PM UTC-4 Bill Notfaded wrote: > >> Great little clocks those Omnixie Plus especially the IN-18 version! No >> cheap but you kinda get what you pay for with these I think. I'm always >> interested in small nixie power supplies. >> >> Bill >> >> On Friday, October 9, 2020 at 10:16:11 PM UTC-7 严泽远 wrote: >> >>> In addition, I just want to add that, the circuit of NCH6300HV was >>> actually tested and has been used in our Omnixie Plus >>> <https://omnixie.com/products/omnixie-plus-wifi-smart-nixie-tube-clock> >>> clocks. So the risk of potential issues will be very low ;) >>> >>> [image: Omnixie and Omnixie plus.jpg] >>> >>> 在2020年10月10日星期六 UTC+8 下午1:02:01<严泽远> 写道： >>> >>>> Thanks all for your support, to the upcoming KS campaign, as well as >>>> the continued support over the years. >>>> >>>> Aiden is my long-time business partner in the US, and we have been >>>> collaborating seamlessly on new product developments, technical support, >>>> sales and marketing etc. Recently we have been working closely on the KS >>>> campaign of NCH6300HV, as well as making YouTube videos. >>>> >>>> Thank you, blkadder, Bill and Richard. We will be more than happy to >>>> keep everyone posted. >>>> >>>> Yan. >>>> >>>> 在2020年10月10日星期六 UTC+8 下午12:24:55<Richard Scales> 写道： >>>> >>>>> I'm in - keep us posted please. >>>>> - Richard >>>>> >>>>> >>>>> On Friday, 9 October 2020 20:48:14 UTC+1, Aiden Fang wrote: >>>>>> >>>>>> Dear all, >>>>>> >>>>>> 8 years ago in Aug 2012, Zeyuan Yan designed and released his first >>>>>> DC-DC boost converter, NCH6100HV. >>>>>> It has been so popular in the community, thanks to all supporters >>>>>> including (almost, if not all) everyone here in this group. It got too >>>>>> popular that there have been a few dozens of counterfeit products (with >>>>>> poor quality components) on eBay and AliExpress. >>>>>> >>>>>> NCH6100HV is measured only at 1.77*1.46*0.7in (45*37*18mm) but is >>>>>> capable of powering *TWELVE* IN-18 tubes at once! This could have >>>>>> not been achieved without the premium components we picked from TDK, On >>>>>> Semi, SANYO, Bourns, nichicon, Vishay, Sumida etc. >>>>>> Together with the gold-plated PCB board and the carefully-thought-out >>>>>> layout, the NCH6100HV is capable of providing 55-60mA at 170V without >>>>>> voltage drop! >>>>>> >>>>>> With 10V-24Vdc as input, the output ranges from 85V to 235V, >>>>>> adjustable by tuning a pot on board. >>>>>> >>>>>> As a safety measure, a "shutdown" pin is provided so that the output >>>>>> voltage can be completely turned off when you need to, simply by pulling >>>>>> the "shutdown" pin to Vin or High. Both wire terminals and 0.1" >>>>>> pitch pins are included for more versatile applications. >>>>>> >>>>>> >>>>>> Long story short, 8 years later today, it is time to update the >>>>>> popular NCH6100HV to a new model, *NCH6300HV*. >>>>>> >>>>>> With the suggestions from our customers over the years in mind, we >>>>>> made a complete redesign of this converter module, and here is a glimpse >>>>>> of >>>>>> the updated features of this brand new NCH6300HV. >>>>>> >>>>>> * Input Voltage now starts from *3.7V* (Yes to LiIon batteries!) to >>>>>> 15V. >>>>>> * Output Voltage 100-230V, at *100mA* Max!!! (@Vin=12V, Vout=170V) >>>>>> * Conversion efficiency increases from 83% to whopping *92%* >>>>>> * 0.28"(7mm) shorter at 1.77**1.18**0.7in (45**30**18mm), compared >>>>>> to NCH6100HV at 1.77**1.46**0.7in (45**37**18mm) >>>>>> >>>>>> We are preparing a Kickstarter Campaign for this coming NCH6300HV. >>>>>> This will be our first time on KS, so we would like your suggestions >>>>>> and comments. Pledge options, add-ons, target, anything you'd like to >>>>>> input. Your insights are highly appreciated. >>>>>> >>>>>> The campaign is preliminarily planned to launch in a few weeks, by >>>>>> the end of October. If everything goes well, we will be able to ship >>>>>> these >>>>>> new converters in late Nov to early Dec, just in time to catch Santa's >>>>>> sleigh ;-) >>>>>> >>>>>> Thank you all for your time and support! Cheers! >>>>>> >>>>>> Warm regards, >>>>>> Aiden >>>>>> California >>>>>> [image: ks.jpg] >>>>>> >>>>>> >>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/4329f6ec-517c-431d-8db0-f0e1c80588een%40googlegroups.com.
