Hi Richard

Thank you for the detailed reply. I'm looking at coupling up a scope clock to my weather home station and also to one of the world weather station web sites. The steps I'm planning are not unlike the ones you have taken so it is encouraging that I'm working along the right lines.

cheers Grahame

Highlands Scotland

On 21/11/2020 13:28, Richard Scales wrote:
That is a very interesting question!

We live on the south coast of the UK - right in the middle and our local part of the coast is Chichester Harbour.

Outside the entrance to Chichester Harbour is a tower that has sensors to gather the information and displays it at www.chimet.co.uk.

Disappointingly, Chimet present the data as a piece of graphics and do not provide any api or similar :-(

However, Chichester Harbour Conservancy spookily display the same data in raw text for on their site.

On a little piece of my web space I have a page with some PHP which rips the data from the conservancy site and presents it as a very short text string.

The WeMos in my clocks reaches out and grabs that short text string and parses it to get the date which ultimately gets displayed on the clock.

These clocks have a WeMos which does the NTP time sync, reads sensors and grabs that web data. This is all sent out as a heavily modified GPS style string to a Teensy which threshes around controlling the display. It runs a 'state machine' kind of code which updates the display with various bits of information (including the time) whilst also reading in the text string and parsing it.

This then sends strings to the chain of 'smart socket's for display.

I have this kind of thing working with B-7971, ZM1350, SP-101 and now this LED clock.

Coming soon - a 21 segment display based on a design from the late 1800's and using neons.

The interest in wind speed and direction is that we are keen divers and sailors and accordingly - we love to know what's happening with the weather so we can decide whether to dive, sail or make clocks!

- Richard



On Saturday, 21 November 2020 at 11:17:14 UTC Sgitheach wrote:

    Hi Richard

    Where does the local wind speed and direction data come from?

    Grahame

    On 21/11/2020 10:30, [email protected] wrote:

    I’ve finally completed the housing for my smart socket based LED
    clock.

    It does time, day, month, year, temp, pressure, local wind speed
    and direction, NTP sync, motion detect and it lets you know where
    in the world its 'just after 5' (that was a friends idea, honest).

    I found the most enjoyable part of this project was designing the
    smart socket boards and getting the PIC code to work. The rest
    was assembly and housing which I seem to enjoy less.

    The LED’s really don’t photograph very well. I had to drive them
    at about 25% duty cycle as they really are super-bright otherwise
    – they would work well outdoors.

    The dodgy looking hole in the left hand wooden part is hiding a
    BMP280 temperature and pressure sensor. I thought I should give
    it half a chance of reading the ambient temperature rather than
    what was going on inside the case.

    - Richard


--
You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] <mailto:[email protected]>. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9c63fa91-0086-4ad1-83bf-5eb9a80b597en%40googlegroups.com <https://groups.google.com/d/msgid/neonixie-l/9c63fa91-0086-4ad1-83bf-5eb9a80b597en%40googlegroups.com?utm_medium=email&utm_source=footer>.

--
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/2a49ac95-a02c-7265-05c2-5c9c25f56ad9%40googlemail.com.

Reply via email to