Goof Off may be what you need. I've used it to remove lacquer paint and it should work on these tubes as well. It evaporates quickly, so pour a bit on a paper towel and use that to wipe off the lettering.
On Tuesday, January 5, 2021 at 6:16:40 PM UTC-6 [email protected] wrote: > > I've received a few boxes with TH4B tubes which I think look quite nice as > coluns. > However, since these are not meant to be used as neon tubes there's > printing on them which I have to remove. > I've tried putting the bulb in the usual suspects like alcohol (97%), > Acetone and sticker remover GooGone and WD40) but all to no avail. > There's a layer of lacquer protecting the printing which I can scratch off > with my finger nail but this is quite tedious and I would like to be able > to process many bulbs at one. > Does anyone know how this can be easily removed? > Thanks in advance. > [image: TH4B_1.jpg][image: TH4B_2.jpg][image: TH4B_3.jpg][image: > TH4B_4.jpg] > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/ba8890a4-eaef-402c-9609-a3b21859b1d4n%40googlegroups.com.
