They are soldered on the other side of the PCB. Besides there is illumination on each digit that is not working. It's just on the bottom as seen in the photo. So there is pin contact just fine.
On Friday, January 29, 2021 at 3:44:10 PM UTC-5 Dekatron42 wrote: > The soldering on the pins looks like it needs a rework, the holes are not > filled with solder, try to redo them and see if that changes anything. > > /Martin > > On Friday, 29 January 2021 at 18:04:00 UTC+1 [email protected] wrote: > >> Hello All, >> >> I recently purchased a kit to make an IN-8-2 clock. It has been working >> without flaws for almost 2 months. Yesterday the 0 digit stopped working, >> and in the photo you can see it is now lighting up only on the floor of the >> tube. This morning, the 1 now went out with same effect. >> >> What do you think is the cause of this? I do not think it is a driver as >> the other tubes are fine. >> Any way to salvage the tube? >> >> [image: IMG_2369.jpg] >> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/b2ce62ca-9fba-40d4-b704-4d82e8e50061n%40googlegroups.com.
