Arduino Pro Micro
K155ID1 Nixie Tube Driver x 2 MPSA42 High Voltage Transistor 20K Resistor x 3 NCH8200HV High Voltage DC-DC Boost Converter GY-521 3 Axis Accelerometer TP4056 Type-C USB 5V 1A Battery Charger Module 3.7V 240mAh Lipo Battery 5mm x 20mm x 30mm 1A Latching Push Button Switch 12 x 8 x 8mm On Friday, March 5, 2021 at 11:37:22 AM UTC-8 Paul Andrews wrote: > That's cool. A pretty complete concept, with a battery too. What did you > use for the charger? > > On Thursday, March 4, 2021 at 5:18:11 PM UTC-5 [email protected] wrote: > >> Hey all, >> >> I thought some of you might like this project I finished last weekend. >> I had a couple of N-12's and wanted to do something different with them >> other than a clock to a watch etc. So I durned them into some dice. >> >> The left tube is one Die and the right tube is the other... you shake the >> device to "shuffle" and then set it down to "roll" once it lands on both >> numbers, it totals them up and shows the result. >> >> I made a video demonstrating them here: https://youtu.be/OjV2rZLKhQE >> >> [image: image1.jpeg] >> >> [image: image0.jpeg] >> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9bd91fde-8e16-4d13-833a-f97b6ee560b0n%40googlegroups.com.
