I use Fosol (generally phosphoric acid). pon., 19 kwi 2021 o 00:31 Max DN <[email protected]> napisał(a):
> I've been wondering whether the good old Coca Cola can actually work too > or perhaps too corrosive... > > Il giorno domenica 18 aprile 2021 alle 23:23:03 UTC+1 martin martin ha > scritto: > >> To all and thanks! I used a fine grain paper just a bit to rid the >> corrosion and gentle scraping with a fine blade. All tubes light well and >> look good. Soon to be enclosed in a hardwood box. >> >> >> On Wednesday, April 14, 2021 at 2:20:03 AM UTC-7 [email protected] >> wrote: >> >>> There's a type of nail file - actually a buffer, I think - which has a >>> similar very fine abrasive. There are no visible grains of abrasive and the >>> file appears to be a smooth pink or white (according to the grade) >>> material. They're sometimes used by model rail enthusiasts to clean the >>> track without creating deep scratches. Other track cleaning products might >>> also be good. >>> >>> On Wed, Apr 14, 2021 at 1:22 AM alb.001 alb.001 <[email protected]> >>> wrote: >>> >>>> I use a 3M diamond abrasive plastic film which you can get in finess >>>> down to 1 micron. I use a 10 Micron one for very fine gentle sanding of >>>> things like nixie pins. It is slow but effective. Coarser versions would >>>> work faster. >>>> >>>> Pharma Phil >>>> >>>> ---------- Original Message ---------- >>>> From: Nicholas Stock <[email protected]> >>>> Date: April 12, 2021 at 11:00 PM >>>> >>>> Martin, i'd use some emory board (nail files) to lightly sand the rust >>>> off of them.....done that with a few tubes myself with no issues. >>>> >>>> Cheers, >>>> >>>> Nick >>>> >>>> Sent from my iPhone >>>> >>>> On Apr 12, 2021, at 19:47, martin martin <[email protected]> wrote: >>>> >>>> Hi all, >>>> >>>> I had a few Burroughs B5092s sitting around and thought I would build a >>>> little 6 shooter from PV Electronics. I like this model since you can >>>> create your clock using any tubes. You just have to wire them up >>>> multiplexed. >>>> Anyway, I used NOS ceramic sockets but the pins on the Nix's are very >>>> dirty and corroded. >>>> How can I safely clean them? >>>> >>>> Thanks! >>>> >>>> martin >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "neonixie-l" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/308da5ab-3f88-447d-a9f6-b9d52d324cb8n%40googlegroups.com >>>> <https://groups.google.com/d/msgid/neonixie-l/308da5ab-3f88-447d-a9f6-b9d52d324cb8n%40googlegroups.com?utm_medium=email&utm_source=footer>. >>>> >>>> <IMG_1620.JPG> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "neonixie-l" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/F408C9D4-AAD1-4720-9171-6B6A77E1EDB2%40gmail.com >>>> <https://groups.google.com/d/msgid/neonixie-l/F408C9D4-AAD1-4720-9171-6B6A77E1EDB2%40gmail.com?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "neonixie-l" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web, visit >>>> https://groups.google.com/d/msgid/neonixie-l/758554033.2275758.1618359751066.JavaMail.open-xchange%40torgui02 >>>> <https://groups.google.com/d/msgid/neonixie-l/758554033.2275758.1618359751066.JavaMail.open-xchange%40torgui02?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/3645842e-fae0-48f0-a323-80529f90ba81n%40googlegroups.com > <https://groups.google.com/d/msgid/neonixie-l/3645842e-fae0-48f0-a323-80529f90ba81n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/CAF-66xCgrYGP1CxdCvf2QNpJWSLyR%2BGoirsbtEjf_7_%2BC2U_WA%40mail.gmail.com.
