Looks really nice On Sunday, November 7, 2021 at 5:14:52 PM UTC-5 newxito wrote:
> Today I built the clock. There is an error on the board, the DataIn pin of > the LED array is connected to the wrong side of the level shifter, but it > seems to work fine with 3.3V. I also had problems with the input protection > (over, under and reverse voltage). I always used the circuit with 12V but > this boards uses 5V, probably the monitoring window is too small. Anyway, > removing some components and a big blob of solder, solved the problem :-) > I fill fix the design errors on Rev2… time to start making the case… > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/25b39169-7eeb-465e-9bf6-6c13db656ea8n%40googlegroups.com.
