I'm going to make this one a single board using the Z573M/Z574M tubes, since I have enough for a batch of kits.. but yes, I have in mind something more modular later.
I'll look into the feather. I've heard of it, but never tried one. There is plenty of prototyping space.. so I'm sure it can be hand wired in. Regards, -Moses On Wednesday, May 18, 2022 at 2:23:37 AM UTC-7 bani wrote: > On Tue, 17 May 2022, Moses wrote: > > Now on to the point of this post. Before I order the second prototype, I > would like to know what people think of it. > > > > Comments about the overall design or any specifics, what you like or > don't like about it. Any changes or additions you would make? > > > > There is still time for me to make changes.. so if there are any other > standard pinouts (like for the light sensor/etc) that I can easily add I > will. This was my first real experience with the > > ESP32 board and it works well in the design along with the Pi Zero which > has a big following. > > I'd like to run IN-18 tubes. Or millclock ZIN-70. Or dalibor's R568M. A > modular design would be nice :D > > adafruit feather pinout would be nice too. there's a reasonably large > choice of microcontrollers and devices that use this. > https://www.adafruit.com/category/943 > > -Dan > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/cd776ac2-6908-483e-bcf1-f969d8c2e126n%40googlegroups.com.
