I use these:
https://www.ebay.com/itm/184292653297?hash=item2ae8b2b8f1:g:kigAAOSwfDBgEr4h
[image: socketpins.jpg]
On Tuesday, June 28, 2022 at 1:42:23 PM UTC-7 SD wrote:
> Thanks for the info. What are the pin dimensions/diameter? I tried some
> pins i had from other projects but the Burroughs’ are too large to fit.
>
> Thanks
> Scott
>
>
> On Jun 3, 2022, at 10:57 PM, Richard Scales <ric...@scalesweb.co.uk>
> wrote:
>
> I have sockets for these. There are also 'smart sockets' which include a
> PIC microcontroller which does all the 'heavy lifting' making it very easy
> to drive.
>
>
> I also have a design for a single tube clock which incorporates a 'smart
> socket'.
> - Richard
>
>
> On Tuesday, 17 May 2022 at 18:47:21 UTC+1 Paul Andrews wrote:
>
>> This is one I made a while back. It uses the tube socket pins that LB(?)
>> referred to. I see it isn't very well labelled, in terms of what value of
>> resistors to use, and it uses surface mount resistors. Anyway, there it is.
>> https://oshpark.com/shared_projects/G9c1wPoq
>>
>> On Monday, May 16, 2022 at 5:02:23 PM UTC-4 SD wrote:
>>
>>> Hello
>>> I was referred to this mail list, thank you
>>> I am sitting on for years a 7971 that I want to use/adapt but cannot
>>> find any sockets from ebay that are not very expensive. I do not want to
>>> permanently solder to a perfboard, etc. these things are super pricey
>>> now.
>>> any help appreciated
>>>
>>> thanks
>>> scott
>>>
>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "neonixie-l" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/neonixie-l/9SqOYOIF91A/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> neonixie-l+...@googlegroups.com.
> To view this discussion on the web, visit
> https://groups.google.com/d/msgid/neonixie-l/b764a216-f01a-4d51-827d-b82a4de5a75fn%40googlegroups.com
>
> <https://groups.google.com/d/msgid/neonixie-l/b764a216-f01a-4d51-827d-b82a4de5a75fn%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/7b9936da-eb0d-4978-bdfb-a7298bccfbben%40googlegroups.com.
