I'd be curious to see how the timing circuit works and how accurate it is, I believe Jeff didn't use a uC for that. -------- Original message --------From: Terry S <[email protected]> Date: 31/08/2022 22:44 (GMT+00:00) To: neonixie-l <[email protected]> Subject: Re: [neonixie-l] Jeff's Nixie watch parts layout or schematic? His son Christian reads this group, he may have the documentation.On Tuesday, August 30, 2022 at 10:18:54 AM UTC-5 Greg P wrote:Hi Nick,I appreciate you sharing this BOM, but it's for the Commemorative clock which is the one that replaced the one I have. Mine is his first piece that used a modified Mike Harrison PCB and work on mains power not a 12V power supply.On Tuesday, August 30, 2022 at 10:44:34 AM UTC-4 Pramanicin wrote:Greg, I built one of these almost 20 years ago now....(wow). This is all the documentation I have on it. Hope it helps.NickOn Tue, Aug 30, 2022 at 7:40 AM 'Greg P' via neonixie-l <[email protected]> wrote:Speaking of Jeff's stuff, does anyone have a manual or any documentation for that matter on this clock?http://www.nixie.dk/~jthomas/nixieclock.htmlThis was the first clock he made for sale.On Tuesday, August 30, 2022 at 12:30:29 AM UTC-4 [email protected] wrote:That would be fantastic. You don't know how much misery that would eliminate, every time I walk by those bags of parts. I was about to zoom all the way in on the picture of the PCB on his site and try to read SMD capacitor values! ;)Thanks!!...ROn Monday, August 29, 2022 at 11:28:49 PM UTC-5 nixiebunny wrote:I think I have that information on my home computer. I'll be home Friday. On Mon, Aug 29, 2022, 7:09 PM Rob Bailey <[email protected]> wrote:Ages ago, I purchased Jeff's Krusty Klown nixie watch kit [two, in fact]:http://www.nixie.dk/~jthomas/watch.htmlOf all parts of a kit to lose, I lost the paperwork [i.e., schematic and, critically, the parts placement guide]. I was able to contact the project owner, but he said he no longer had any of the documentation [!]. I'd like to build the kits, bit I'm at the mercy of guesswork, which I'd obviously like to avoid.Does anyone know where I can track that parts placement sheet down, or better yet have one that I can grab a scan of?Thanks!
-- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/56b72986-ba38-4895-9f19-d8eaacd0499an%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/e94c9f40-500f-42bc-93a8-3708026dee59n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/34024632-750a-4594-964d-6ad2a22216b6n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/630ff5bf.050a0220.e2ea2.9527%40mx.google.com.
