As for the ones on nixieclock.biz <http://nixieclock.biz/>, they look o be a light step up because of more programming ports, but it’s the same identical architure. Perhaps a different controller, a slightly less dodgy power supply, and so on.
I’ver looked at kits and all I can find are some pretty simple ideas of what to do when I build my one clock that won’t Cath fire when I turns on. The one I would save up for is from: https://www.daliborfarny.com/. At least it won’t burn down you house. Or build your own . They are not that hard to do. > On Dec 12, 2022, at 10:58 PM, gregebert <[email protected]> wrote: > > I dont know how anyone could sell it for so cheap; the components cost more > than 25USD. Yet, there it is. > I bought a similarly-cheap edge-lit clock last year (well, OK 38USD including > shipping, and it's 6 digits). It's kept accurate time and puts on quite a > light-show. > > On Monday, December 12, 2022 at 8:19:07 PM UTC-8 Richard Scales wrote: >> From the pictures I would say that it does use pin sockets therefore I would >> expect them to be included. >> >> The evidence being that A) - you can just see them in the top view of the >> clock and B) the holes on the PCB look too small for the pins on IN-12 tubes. >> >> ... though for $25.38 including shipping - who knows what you'll end up with! >> >> For my money - if I was looking for a pre manufactured board then I would >> look no further than here: https://www.nixieclock.biz/StoreMNC6.html >> >> OK, no case, 6 digits and not IN-12 but you are getting a feature rich well >> designed clock from a respected supplier. He does have a kit for 4 digits of >> IN-12 but you would need to assemble that yourself. >> >> - Richard >> >> >> On Tuesday, 13 December 2022 at 03:15:01 UTC Terry S wrote: >>> https://www.ebay.com/itm/314168311777 >>> >>> Many sellers on ebay. >>> >>> Does it come with pins for the tubes? >>> >>> Terry > > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/e56f71c7-6691-45be-a799-720480c08d6fn%40googlegroups.com > > <https://groups.google.com/d/msgid/neonixie-l/e56f71c7-6691-45be-a799-720480c08d6fn%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/42CC3049-AA30-47E6-AE9C-3A454B873E45%40schnur.org.
