May not have been cheap, but it adds the icing to the cake! -joe
On Thu, Feb 2, 2023 at 6:49 AM Olivier <[email protected]> wrote: > Hi Joe > > I had the brass work done by an engraving company. Not cheap though! > > Thanks IanV! > > Cheers, > Olivier > > On Thursday, 2 February 2023 at 7:42:28 pm UTC+8 iavine wrote: > >> Very nice. >> >> IanV >> >> On 2 Feb 2023, at 11:12, Joe Croft <[email protected]> wrote: >> >> >> >> Hi Oliver, >> >> Very good job. Very pretty device! I love the brass work! Did you do the >> brass work yourself? If so, what did you use for cutting and etching? >> >> Analogue rules! (says the SW guy) >> >> -joe >> >> On Wed, Feb 1, 2023 at 11:55 PM Olivier <[email protected]> wrote: >> >>> Hello, >>> >>> Over a year ago I found some picture of a IN-13 vu-meter made by Paul >>> from Bad Dog Designs. I contacted Paul to get more details on his built and >>> he happily replied. I then decided to start my own. >>> >>> I built a one channel prototype with through-the-hole components and >>> then re-designed the PCB to use SMDs as I needed the board to be very >>> small. I built each channel on one separate PCB to reduce cost; they are >>> all stacked together. >>> >>> Then I had the oak wood box made locally by a carpenter and the brass >>> plates as well. The final results is below: it uses 20 IN-13 tubes, 10 for >>> each channel. The choice of frequencies matches a home-made 10 octave >>> equaliser you can see below. >>> >>> It is working fine, though some channels need some additional fine >>> tuning! It is fully analog. >>> >>> >>> Cheers, >>> >>> Olivier >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "neonixie-l" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web, visit >>> https://groups.google.com/d/msgid/neonixie-l/0d5d34c3-9802-452b-8498-440662660074n%40googlegroups.com >>> <https://groups.google.com/d/msgid/neonixie-l/0d5d34c3-9802-452b-8498-440662660074n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/CAE%2BVk6PZMnf5q0EbHmNa1OCM8USZWG%2BEPRHRZ9Ms_Z7acAYLjg%40mail.gmail.com >> <https://groups.google.com/d/msgid/neonixie-l/CAE%2BVk6PZMnf5q0EbHmNa1OCM8USZWG%2BEPRHRZ9Ms_Z7acAYLjg%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/0ab4264a-f5c7-42b5-8a26-b46a268632den%40googlegroups.com > <https://groups.google.com/d/msgid/neonixie-l/0ab4264a-f5c7-42b5-8a26-b46a268632den%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/CAE%2BVk6Or-OH-CosZkZd4_udsVGVLJU%2BkdSptiOxu8hybYeGg1w%40mail.gmail.com.
