Paul - How much insertion force is required for the MillMax pins ? Do you have to use needle-nose pliers on each lead, or can you plug-in the tube ? What about removal ?
I have a future VFD project with Soviet-era tubes that have leads, and havn't decided on solder vs socket. On Wednesday, August 2, 2023 at 9:05:21 AM UTC-7 Paul Andrews wrote: > For tubes with leads rather than pins I use Mill-Max > 0665-0-15-15-30-27-10-0 https://www.digikey.com/short/pd7709hz > > On Wednesday, August 2, 2023 at 11:36:08 AM UTC-4 Benoit Tourret wrote: > >> Hello, >> >> I am searching for female pins where I could insert the flexible pins of >> a nixie tube such as a IN-14 or a IN-8-1 without soldier them. >> of course, this should working also with VFD tubes. >> >> the idea should for testing tubes, for prototyping or non permanent >> purpose... >> >> Regards, >> Benoit. >> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/4bb57a30-b6c9-4b5e-8211-c268041a934cn%40googlegroups.com.
