>From what I recall when I worked for Grass Valley Group, SMPTE timing info can be sent in an NTSC video signal during the vertical blanking interval, or thru a dedicated audio channel. Do you know which channel this equipment uses ?
On Thursday, June 13, 2024 at 5:03:30 PM UTC-7 Adrian Pardini wrote: > > Congratulations! > > What a nice piece of equipment. > On Thursday, June 13, 2024 at 6:06:20 PM UTC-3 Mac Doktor wrote: > >> I acquired this recently: >> >> https://www.ebay.com/itm/266798260729 >> >> Now all I need is a SMPTE time code generator and the info for hooking it >> up to this.. Does anyone out there have any experience with this? Just >> asking before I go down the rabbit hole. >> >> It arrived with the top PCB completely loose and it isn't lighting up >> properly. The one IC I pulled on popped right out. I was amazed. It's >> usually the other way around. But hopefully this means that reseating the >> TTL will fix everything. >> >> I suppose the Frames display could be used for the date. >> >> >> Terry Bowman, KA4HJH >> "The Mac Doctor" >> >> https://www.astarcloseup.com >> >> "Every kid starts out as a natural-born scientist, and then we beat it >> out of them. A few trickle through the system with their wonder and >> enthusiasm for science intact."—Carl Sagan, *Psychology Today*, 1996 >> >> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/56db8b46-74d6-4b82-9817-dc4e3abd5697n%40googlegroups.com.
