Absolutely beautiful,luv it
From🚨Peter Hall😁 insidiousnixies🦘Utube
On 3 June 2026 7:03 pm, Martin Černý <[email protected]> wrote:
This is the project I needed HV3418 for btw, it's a "analog" nixie clock. While it worked with HV507, I couldn't run the clock to its full potential / brightness. Now all it needs is a cleanup and nice case.--Dne středa 3. června 2026 v 9:05:55 UTC+2 uživatel Martin Černý napsal:I'd certainly be interested. How much would you ask for those chips?Dne úterý 2. června 2026 v 17:35:19 UTC+2 uživatel 严泽远 napsal:I have some HV9708 and HV57708 chips in my stock, I used HV57708 to make IN-14 nixie clocks ten years ago, I'd be happy to share them if anyone needs them.在2026年6月2日星期二 UTC+8 22:45:09<andybiker> 写道：I'm sure we could use the driver chips for plasma TVs. if you can find the dataOn Tuesday, June 2, 2026 at 1:56:54 PM UTC+1 Martin Černý wrote:Apparently these chips were used in industrial printer machines. Searching on ebay for "kodak charge driver board" does yield some results of used PCBs with HV3418 onboard. Those boards are expensive but so far seem to be the only way to get the chips. I got myself one of those boards, hopefully the chips work.If anyone find a different source, please add it here! Those chips are super useful for variety of neon projects.Dne pondělí 16. března 2026 v 8:54:38 UTC+1 uživatel Martin Černý napsal:My reply doesnt show for some reason... I do already use HV507 but I have to pwm so it doesnt overheat. HV3418 is more powerful so I could run the neons at full potential :) It's pin compatible so I could just swap them.Dne neděle 15. března 2026 v 19:38:25 UTC+1 uživatel Michael G. napsal:You might be able to use https://www.digikey.de/de/products/detail/microchip-technology/HV507PG-G/4902491?s=N4IgTCBcDaIBYDcCsAGA7CAugXyA. However, it’s only 5V, not 12V, but the pin configuration is compatible. The rest of the specifications are also the same, or at least very similar.Martin Černý schrieb am Sonntag, 15. März 2026 um 13:00:16 UTC+1:If anyone has this driver, please let me know. I'd be immensely grateful, need two of them for a special clock project.
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion, visit https://groups.google.com/d/msgid/neonixie-l/41f335e7-7c3c-4982-90a5-1db916cf2a64n%40googlegroups.com.
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion, visit https://groups.google.com/d/msgid/neonixie-l/SY8P300MB02982CFE5A688CB99E0189E0A6132%40SY8P300MB0298.AUSP300.PROD.OUTLOOK.COM.
