anyone out there ever use the 4ru#10 board by purple audio in the master section? I've been on the fence about it for a while.
On Mon, Sep 22, 2008 at 11:33 AM, <[EMAIL PROTECTED]> wrote: > I just had Richard Zeier, a former employee of Martin Sound who used to > make Neotek consoles, modify my Neotek Elite (again). > > Before having Richard do the mods, other "mod guys" told me the long > laundry list of things they would do to the Neotek. But when I asked if > they had worked on one.. things got sketchy. Richard has built these > consoles from the ground up and knows them as well as anyone. > > Basically, all the TL07x's are swapped out with Burr Browns in both the > master, monitor, and line input channels. Depending on the use, different > BB opamps were utilized. All the electrolytics are replaced with Nichicon > HE's with WIMA bypass caps. Certain caps are bypassed. A new audiophile > transistor package was put in the balanced out of the master section. > > It is beyond a night and day difference. The master section alone will > make your kick drums sound beefier and thicker and more present, all your > ambience and depth will become way more noticeable. the lower mids will lose > their GUNK and remain crystal clear, and the top end will be smoother and > deeper. It was very affordable for the mods considering how world class > this console sounds, and I recommend that if you are serious about your > audio then get some upgrades done, starting with the master and monitor > sections, then doing some channels. > > Richard's contact info is: > [EMAIL PROTECTED] > > > > > > ------------------------------ > Looking for simple solutions to your real-life financial challenges? Check > out WalletPop for the latest news and information, tips and > calculators<http://pr.atwola.com/promoclk/100000075x1209382257x1200540686/aol?redir=http://www.walletpop.com/?NCID=emlcntuswall00000001> > . >
