Hi Mark
I am interested that you are asking others when you probably have the
answer.
I would suggest you do some chip swaps on your 'good' channel, fitting
original types (one at a time) or other alternatives and hear for
yourself which gives best sound and which give best price. Try different
positions too as there will be differences.
You can then decide which is the best way to go with your budget. We
would certainly all be interested in your findings.
As I believe all the chips are socketed it need not involve getting a
'tech' in to do this (until in your confusion of the 50th swap you put
one in backwards!).
Good luck
Matt S
Hey all-
My tech finished recapping my 1E and it sounds a world better. He
also put some higher speed chips in the master, LT1359's (I think) and
increased some cap values so the desk has a much better low end now..
As a test we rechipped one of the channel inputs and the results were
not subtle. OPA4137's plus one LT1359 and a 49710. The clarity and
purity of the eq is much, much nicer.
After hearing this we are thinking of doing the whole desk. My
question is, should we go with 1359's where possible? That will get a
little pricey, relatively speaking. Direct from LT they are $6.80 a
pop in quantities over 100.
Also, do the OPA4134 sound plus versions make a big difference vs the
4137's? I think he got the 4137's because we couldn't find dip's in
the other.
Either way the chips offer a nice improvement. If we are going to go
through the hassle I just want to get the right parts and spend money
wisely.
Thanks for your input-
Mark
Sent from my iPod
------
You can unsubscribe at anytime by sending an email to
mailto:[EMAIL PROTECTED] with "unsubscribe neotek" in the
message body. If you have any difficulties, or questions --please send
an email to [EMAIL PROTECTED]
The Neotek list is lovingly hosted by Catapult Web Development.
Remember that any message or reply sent to the list will be
automatically forwarded to all subscribers.
Vive Le Neotek !
Thanks.
------
You can unsubscribe at anytime by sending an email to mailto:[EMAIL PROTECTED] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to [EMAIL PROTECTED]
The Neotek list is lovingly hosted by Catapult Web Development. Remember that
any message or reply sent to the list will be automatically forwarded to all
subscribers.
Vive Le Neotek !
Thanks.
