Hi Paul,
If you just re-capped it, check your work! Things to look for are:
polarized caps put in backwards, solder bridges shorting out adjacent
traces (be especially vigilant around pads for caps you replaced, I have
noticed lately that on single sided circuit boards, it's common for the
solder to spread a bit when being removed...can look just like it is
supposed to be there), wires that broke off while the circuit board was
being handled, ditto for connections for devices that are mounted
off-board, like pass transistors, etc.
Good luck,
Ike
Paul wrote:
Help! I've got a power supply from a Neotek Series1, and I just recapped
it... the neg(-) supply now does not work/light up on the front-- any
ideas?
Thank you, guys!
Paul Sinclair
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Scott Hommel
Sent: Saturday, December 05, 2009 11:20 PM
To: [email protected]
Subject: Re: NEOTEK: power supply for 8 racked Neotek Series 1 channel
strips
Frank,
I am in Vermont. If you want to take this off the list, feel free to
respond directly to me at [email protected]. Thanks.
- Scott
On Sat, Dec 5, 2009 at 11:14 PM, Frank Moscowitz
<[email protected]> wrote:
Hi Scott,
Where are you located?
Frank
On Sat, Dec 5, 2009 at 11:10 PM, Scott Hommel <[email protected]> wrote:
Hello,
I have a rack of 8 Neotek Series 1 channel strips with broken power
supply. I'm looking to have the existing box repaired, or buy a new
one to power the rack with. Hoping someone out there can point me in
the right direction!
Thanks,
- Scott
------
View the list online at:
http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the message
body. If you have any difficulties, or questions --please send an email
to
mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any
message or reply sent to the list will be automatically forwarded to all
subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the message
body. If you have any difficulties, or questions --please send an email to
mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any
message or reply sent to the list will be automatically forwarded to all
subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
--
Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls" - Repairs and upgrades to analog audio equipment including:
AMEK, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more.
www.zimbelaudio.com
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
