Would you happen to have a manual that documents what the ACD panels correspond to on the board? I have 3 panels, and after testing found that board A 1-12 corresponds to the actual channels, and the ones below it (I think 31+) are the outputs of that channel. However, the signal to my test amp from the single output is horribly weak, even though it shows I'm peaking on the meters. Through headphones it's loud. I also want to find the stereo outputs because channel direct out is not affected by the busses or stereo slider. Which I guess I'd also need to know the outputs for the subs... ADC + No Manual = Extremely Confusing!
--- On Mon, 3/22/10, Jack Stauss <[email protected]> wrote: From: Jack Stauss <[email protected]> Subject: Re: NEOTEK: Neotek Series 1 - Documentation? To: [email protected] Date: Monday, March 22, 2010, 1:11 PM I believe I can help you out if you haven't found any other resourses... Jack Dean StaussNo Static Pro Audio Inc.3083 N. California St.Burbank, Ca. 91504818-729-8554818-729-8551 Faxwww.nostaticav.com Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message On Mar 17, 2010, at 6:57 PM, Mike Thompson wrote: I'm looking to obtain schematics and manuals for a Neotek Series 1 console. Just picked one up for a studio project, not sure the actual model yet, but it's definitely a series 1, 12-channel 8-buss monster. Very cool console but I need to know how to get it working properly! Any help would be greatly appreciated. Thanks in advance - Mike Thompson
