It's not possible. That is the nature of NAT. If you want to know the security vulnerabilities of the internal network _as seen by the outside world_, you scan the single public IP with a wide range of ports and all possible ping methods.
Carl -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Naveen Pareek Sent: Tuesday, August 05, 2003 12:42 AM To: [EMAIL PROTECTED] Subject: How to scan Private Network through Public Gateway Hi, I want to scan my company's private network. This will be external scan. There is one router with one public IP. Through that IP i want to scan private network of my company. Is it possible then how? If i'll put target as 192.168.0.0/24 then it will not scan because this IP is range is invalid. If i'll put 202.145.16.0/29 then it will scan only subnet of 202.145.16.0 but i want to scan 192.168.0.0 through this router ip address. (IP addresses are changed due to security reason.)Please help me out in this issue. Thanks & Regds Naveen Pareek Network Security Engg. Ecom Enable Pvt. Ltd.
