Dear all,
I've solved this problem.
Mabye mib2c can't find the right place where mibs are.
Before useing mib2c, you should set the MIBDIRS env var.
export MIBS=all
export MIBDIRS=/usr/local/share/snmp/mibs
then use mib2c ,it works!
Best regars,
Sam
On 11/17/06, sam luo <[EMAIL PROTECTED]> wrote:
> Dear Daniel,
> Thanks for your suggestion, but the mib2c still not works well,
> I tried the command env MIBS="+OSEE-TEST-MIB" mib2c ustScalarSet.
>
> # env MIBS="+OSEE-TEST-MIB" mib2c ustScalarSet
> (result is:)
> Cannot find module (IP-MIB): At line 0 in (none)
> Cannot find module (IF-MIB): At line 0 in (none)
> Cannot find module (TCP-MIB): At line 0 in (none)
> Cannot find module (UDP-MIB): At line 0 in (none)
> Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none)
> Cannot find module (SNMPv2-MIB): At line 0 in (none)
> Cannot find module (SNMPv2-SMI): At line 0 in (none)
> Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none)
> Cannot find module (DISMAN-EVENT-MIB): At line 0 in (none)
> Cannot find module (DISMAN-SCHEDULE-MIB): At line 0 in (none)
> Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
> Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
> Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
> Cannot find module (NET-SNMP-AGENT-MIB): At line 0 in (none)
> Cannot find module (HOST-RESOURCES-TYPES): At line 0 in (none)
> Cannot find module (LM-SENSORS-MIB): At line 0 in (none)
> Cannot find module (UCD-DISKIO-MIB): At line 0 in (none)
> Cannot find module (IPV6-ICMP-MIB): At line 0 in (none)
> Cannot find module (IPV6-MIB): At line 0 in (none)
> Cannot find module (IPV6-TCP-MIB): At line 0 in (none)
> Cannot find module (IPV6-UDP-MIB): At line 0 in (none)
> Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
> Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
> Cannot find module (IP-FORWARD-MIB): At line 0 in (none)
> Cannot find module (NET-SNMP-EXTEND-MIB): At line 0 in (none)
> Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
> Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
> Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
> Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
> Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
> Cannot find module (SNMPv2-TM): At line 0 in (none)
> Cannot find module (OSEE-TEST-MIB): At line 0 in (none)
>
> You didn't give mib2c a valid OID to start with. IE, I could not find
> any information about the mib node "ustScalarSet". This could be caused
> because you supplied an incorrectly node, or by the MIB that you're
> trying to generate code from isn't loaded. To make sure your mib is
> loaded, run mib2c using this as an example:
>
> env MIBS="+MY-PERSONAL-MIB" mib2c ustScalarSet
>
> You might wish to start by reading the MIB loading tutorial at:
>
> http://www.net-snmp.org/tutorial-5/commands/mib-options.html
>
> And making sure you can get snmptranslate to display information about
> your MIB node. Once snmptranslate works, then come back and try mib2c
> again.
>
>
> > On 11/17/06, Daniel Lacey <[EMAIL PROTECTED]> wrote:
> > > Sam,
> > >
> > > Try this...
> > >
> > > env MIBS="+OSEE-TEST-MIB" mib2c ustScalarSet
> > >
> > > These types of questions are better answered on the users mailing list.
> > >
> > > General information about the mailing list is at:
> > >
> > > https://lists.sourceforge.net/lists/listinfo/net-snmp-users
> > >
> > >
> > >
> > > sam luo wrote:
> > > > Dear all,
> > > >
> > > > I got some problems using mib2c. It seems the mib2c not work well
> > > > on my FC5.
> > > >
> > > > I use net-snmp-5.3.1.tar.gz on FedoraCore5. My operation step by step
> > > > is:
> > > > (as root)
> > > > 1. copy the net-snmp-5.3.1.tar.gz to /usr/local/src
> > > > 2. tar zxvf net-snmp-5.3.1.tar.gz
> > > > 3. cd net-snmp-5.3.1
> > > > 4. ./configure (result is ok)
> > > > 5. make (result is ok)
> > > > 6. make install (result is ok)
> > > > 7. cd perl
> > > > 8. perl Makefile.PL (result is ok)
> > > > 9. make (result is ok)
> > > > 10. make install (result is ok)
> > > >
> > > > It seems the installation of net-snmp-5.3.1 is ok, then I add my own
> > > > mib file.
> > > > Here is the content of my mib file (OSEE-TEST-MIB.txt)
> > > > --my mib file start
> > > > OSEE-TEST-MIB DEFINITIONS ::= BEGIN
> > > >
> > > > IMPORTS
> > > > DisplayString
> > > > FROM SNMPv2-TC
> > > > MODULE-IDENTITY, OBJECT-TYPE, enterprises
> > > > FROM SNMPv2-SMI;
> > > >
> > > > --
> > > > osee OBJECT IDENTIFIER ::= { enterprises 27290 }
> > > > ustScalarSet OBJECT IDENTIFIER ::= { osee 1 }
> > > > ustSSSimpleString OBJECT-TYPE
> > > > SYNTAX OCTET STRING
> > > > MAX-ACCESS read-write
> > > > STATUS current
> > > > DESCRIPTION
> > > > "This is a simple test string."
> > > > ::= { ustScalarSet 1 }
> > > >
> > > > ustSSSecondsSinceChanged OBJECT-TYPE
> > > > SYNTAX OCTET STRING
> > > > MAX-ACCESS read-only
> > > > STATUS current
> > > > DESCRIPTION
> > > > "no use."
> > > > ::= { ustScalarSet 2 }
> > > >
> > > > END
> > > > --my mib file end
> > > > I copy this file to /usr/local/share/snmp/mibs.Then I do the following
> > > > opration:
> > > >
> > > > cd /usr/local/share/snmp/mibs
> > > > export MIBS=all
> > > >
> > > > # snmptranslate -Tp -IR osee
> > > > (the result is:)
> > > > +--osee(27290)
> > > > |
> > > > +--ustScalarSet(1)
> > > > |
> > > > +-- -RW- String ustSSSimpleString(1)
> > > > +-- -R-- String ustSSSecondsSinceChanged(2)
> > > >
> > > > # snmptranslate -IR ustScalarSet
> > > > (the result is:)
> > > > OSEE-TEST-MIB::ustScalarSet
> > > >
> > > > # snmptranslate -IR ustScalarSet -On
> > > > .1.3.6.1.4.1.27290.1
> > > >
> > > > It seems snmptranslate work well, so I try to run mib2c to generate .c
> > > > and .h files.
> > > >
> > > > #mib2c ustScalarSet
> > > > (the result is:)
> > > > You didn't give mib2c a valid OID to start with. IE, I could not find
> > > > any information about the mib node "ustScalarSet". This could be caused
> > > > because you supplied an incorrectly node, or by the MIB that you're
> > > > trying to generate code from isn't loaded. To make sure your mib is
> > > > loaded, run mib2c using this as an example:
> > > >
> > > > env MIBS="+MY-PERSONAL-MIB" mib2c ustScalarSet
> > > >
> > > > You might wish to start by reading the MIB loading tutorial at:
> > > >
> > > > http://www.net-snmp.org/tutorial-5/commands/mib-options.html
> > > >
> > > > And making sure you can get snmptranslate to display information about
> > > > your MIB node. Once snmptranslate works, then come back and try mib2c
> > > > again.
> > > >
> > > >
> > > > Did I do something wrong?
> > > > Is there any problem with my mib file?
> > > > Do I need to use the mib2c configuration file such as
> > > > mib2c.scalar.conf?
> > > >
> > > >
> > > >
> > > > any suggestion will be appreciated.
> > > >
> > > > Best regards,
> > > > Sam
> > > >
> > > > -------------------------------------------------------------------------
> > > > Take Surveys. Earn Cash. Influence the Future of IT
> > > > Join SourceForge.net's Techsay panel and you'll get the chance to share
> > > > your
> > > > opinions on IT & business topics through brief surveys - and earn cash
> > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > > _______________________________________________
> > > > Net-snmp-coders mailing list
> > > > Net-snmp-coders@lists.sourceforge.net
> > > > https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
> > > >
> > > >
> > >
> >
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
