> The problem is when I perform mib2c and create the corresponding mib
> template( I use mib2c.iterate_access) After coding, when I perform
> ./get, I got the following result:
>
> Walk dot11GroupAddressesTable
> IEEE802dot11-MIB:: dot11Address.1.0 = STRING: 11:22:33:44:55:66:1
> IEEE802dot11-MIB::dot11Address.2.0 = STRING: 11:22:33:44:55:66:1
> IEEE802dot11-MIB::dot11Address.3.0 = STRING: 11:22:33:44:55:66:1
> IEEE802dot11-MIB::dot11Address.4.0 = STRING: 11:22:33:44:55:66:1
> IEEE802dot11-MIB::dot11GroupAddressesStatus.1.0 = INTEGER: active(1)
> IEEE802dot11-MIB::dot11GroupAddressesStatus.2.0 = INTEGER: active(1)
> IEEE802dot11-MIB::dot11GroupAddressesStatus.3.0 = INTEGER: active(1)
> IEEE802dot11-MIB:: dot11GroupAddressesStatus.4.0 = INTEGER: active(1)
Use Ox / -OX options in snmpget/getbulk to display values in
Hex.
Also some other column value / index value is appended with
MacAddress value, make sure proper length is used in agent side.
Regards,
Santhosh
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
