Hi All, Net-snmp 5.0.8 is working fine on Blackfin uClinux.
I have a question here. In linux, all the MIB files are stored under /usr/local/share/snmp/mibs folder. The snmpd demon gets the mib files from there. Similarly, Where exactly we have to put the mib files in uClinux? and how to tell the demon where these files are stored? Best Regards, Manu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Shield Sent: Tuesday, March 11, 2008 3:27 PM To: Manu Asm (WT01 - MCE-Consumer Electronics) Cc: [email protected] Subject: Re: Problem in Porting net-snmp to uClinux On 11/03/2008, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Anyway thanks for your help. I have ported net-snmp agent to uClinux and > it is working fine. Is there any chance you could summarise what you had to do to get this working? We're often asked for advice on running this software on embedded systems, but none of the core team have much/any experience of doing this. It would be very useful for others to benefit from your experience. Dave ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
