Hi! Larry Dickson
Thank you very much for kind reply.
I don't understand what you're trying to say and
what do you mean by select is failing?.
How to calculate cpu
utilization in Linux , but here I'm executing top command there I'm
seeing cpu idle is 98% and when I perform SNMP walk operation cpu idle
is showing 0% .
Please help me out.
With Regards,
G. Siva Prakash Reddy.
-----Original Message-----
From: Larry Dickson [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 26, 2008 7:27 PM
To: Siva Prakash Reddy G
Cc: [email protected]
Subject: Re: cpu idle is 0%
Have you checked whether a select is failing somewhere? It can generate
a tight loop with such full CPU utilization. I remember this from a
non-SNMP project, but select is used everywhere.
Larry Dickson
On 3/25/08, Siva Prakash Reddy G <[EMAIL PROTECTED]> wrote:
Hi!
When I'm performing SNMP walk operation, CPU idle time is
showing 0% that means maximum CPU utilization is taken SNMP, this is
happening only in my mib. When I did same operation on host-resource mib
or system mib or any other which provided by net-SNMP source coders, CPU
idle time is showing 88% or 90%, but I'm performing SNMP walk on mib CPU
idle time is showing 0% I don't know why this happening.
If any body knows the solution for this problem, I will be thankful, if
they share. At least if any body can list it out the reason for the
problem, and then I will look into it.
With Regards,
G. Siva Prakash Reddy.
This email message and its attachments may contain CONFIDENTIAL AND
PRIVILEGED INFORMATION intended for the sole use of the addressee(s). If
you have received it in error, please contact the sender by return
email, notify your system manager and destroy the original message and
any copies thereof. Any review, use, disclosure or distribution is
unlawful. Please check this email and any attachments for the presence
of viruses. The Company accepts no liability for any damage caused by
any virus transmitted by this email. The views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of the company.
The Company reserves the right to monitor, review and store the content
of all messages sent to or from this e-mail address.
www.aztecsoft.com <http://www.aztecsoft.com/>
------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketp
lace
_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
This email message and its attachments may contain CONFIDENTIAL AND PRIVILEGED
INFORMATION intended for the sole use of the addressee(s). If you have received
it in error, please contact the sender by return email, notify your system
manager and destroy the original message and any copies thereof. Any review,
use, disclosure or distribution is unlawful. Please check this email and any
attachments for the presence of viruses. The Company accepts no liability for
any damage caused by any virus transmitted by this email. The views or opinions
presented in this e-mail are solely those of the author and do not necessarily
represent those of the company.
The Company reserves the right to monitor, review and store the content of all
messages sent to or from this e-mail address.
www.aztecsoft.com-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
