Hi, all
I visited the Net-Snmp Tutorials on
http://www.net-snmp.org/wiki/index.php/Tutorials
When I want to see some debug method, it prompt that I have to login before
edit. But I don't want to edit it.
So anyone could tell me some debug method? I want to print some message on
the screen.Should I use the DEBUGMSG?
2008/6/3, 杨伟 <[EMAIL PROTECTED]>:
>
> The mib2c config file is given by someone else. So I am not permitted to
> show you. Sorry.
>
> I misunderstand your meaning. Not every row is available. But at least 1
> and 2 are available.
>
>
> 在08-6-3，Dave Shield <[EMAIL PROTECTED]> 写道：
>>
>> 2008/6/3 杨伟 <[EMAIL PROTECTED]>:
>> > The configure file is writen by someone else. It is not provided by
>> > net-snmp.
>>
>> You said that you were generating code using mib2c.
>> But you did not say which mib2c template you were using.
>>
>> I don't see where "configure" comes into things.
>>
>>
>> > I am not clear about your second question. In my mind every row is valid
>> I
>> > think.
>>
>> So you've got a row with index 1?
>> And a row with index 2?
>> And a row with index 3?
>> ....
>> And a row with index 4274?
>> And a row with index 4275?
>> ....
>> And a row with index 9004518462?
>> ....
>>
>> I'm sorry - but I don't believe you.
>> It is not conceivable that "every row is valid".
>>
>> But you are providing so little information about your setup,
>> that it is impossible to offer any useful assistance.
>>
>> Dave
>>
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
