Hi, Thanks for your reply.
I tried it by myself while I asked about it on net-snmp-coders. I asked about this question because I was afraid of side effect of removing mibII/system_mib. I want to heard another one's experience or better solution like /MF's. Anyway, it's a good advice for me. I will try more by myself. Maybe I will learn net-snmp more and better. Thanks, Anyway I will 永鈦鑫 iTAS Corporation 新竹科學園區工業東三路6號 NO. 6, Industry E. Rd. III, Science Park, Hsin-Chu, Taiwan 300, R.O.C. Tel:03-6662595 Ext.1208 E-mail:[EMAIL PROTECTED] ----- Original Message ----- From: "Magnus Fromreide" <[EMAIL PROTECTED]> To: "Tewen Hsieh" <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Tuesday, June 24, 2008 3:06 AM Subject: Re: about remove all default modules > On Mon, 2008-06-23 at 09:58 +0800, Tewen Hsieh wrote: >> Hi Dave, >> >> Thanks for your reply. >> >> I have tried "configure --enable-mini-agent", but mibII/system_mib is >> still >> included. >> If I want to remove it, I just need to use >> "configure --enable-mini-agent --with-out-mib-modules=mibII/system_mib"? > > The following removes all variables from the agent using Net-SNMP > 5.4-branch > > configure --enable-mini-agent --without-mib-modules=default_module > --with-mib-modules= utilities/execute,mibII/vacm_conf > > If you are using Net-SNMP 5.5 (trunk) then, at the moment, 'snmpd' is > buildable without vacm_conf but 'snmptrapd' requires it. > > I do agree with Dave - you really should try things out yourself instead > of asking about every single detail. > > /MF > >> Thanks, >> >> 永鈦鑫 iTAS Corporation >> 新竹科學園區工業東三路6號 >> NO. 6, Industry E. Rd. III, Science Park, Hsin-Chu, Taiwan 300, R.O.C. >> Tel:03-6662595 Ext.1208 >> E-mail:[EMAIL PROTECTED] >> ----- Original Message ----- >> From: "Dave Shield" <[EMAIL PROTECTED]> >> To: "Tewen Hsieh" <[EMAIL PROTECTED]> >> Cc: <[email protected]> >> Sent: Tuesday, June 10, 2008 4:43 PM >> Subject: Re: about remove all default modules >> >> >> > 2008/6/10 Tewen Hsieh <[EMAIL PROTECTED]>: >> >> If I want to compile without all default modules, how can I do? >> > >> > configure --enable-mini-agent >> > >> > That will include the bare minimum to provide a working agent. >> > You can then include any extra modules using '--with-mib-modules" >> > >> > Dave >> > >> > -- >> > This message has been scanned for viruses and >> > dangerous content by MailScanner, and is >> > believed to be clean. >> > >> >> > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
