Thanks for your reply Daniel. I've been reading towards this issue and
noticed that I must use smux to enable communication between quagga and
snmp. I found at that my current quagga version did not support smux so I
compile it with enable_snmp option. Here's my snmpd.conf smux configuration
smuxpeer .1.3.6.1.4.1.3317.1.2.3 ripd
here is my ripd.conf smux configuration
!
smux peer .1.3.6.1.4.1.3317.1.2.3 ripd
!
I relaunched everything and snmpd refuses the smux connection from quagga. I
thought it could be some snmpd version related issue, so I downloaded the
latest version and compiled it addind smux support. However, I continue
receving this in the log file.
smux_conf: parsing registration for: .1.3.6.1.4.1.3317.1.2.3 ripd
smux_conf: password is: ripd
smux_init: [smux_init] done; smux listen sd is 7, smux port is 199
NET-SNMP version 5.4.1.2
smux: [smux_accept] Calling accept()
[smux_accept] accepted fd 9 from 127.0.0.1:43089
smux: [smux_open_process] version 0, len 33, type 2
smux: [smux_open_process] smux peer: GNOME-PRODUCT-ZEBRA-MIB::ripd
smux: [smux_open_process] len 21, type 6
smux: [smux_open_process] smux peer descr: Quagga-0.99.5
smux: [smux_open_process] len 6, type 4
smux: [smux_open_process] smux peer passwd: ripd
smux: [smux_open_process] len 0, type 4
refused smux peer: oid GNOME-PRODUCT-ZEBRA-MIB::ripd, descr Quagga-0.99.5
smux: [smux_close] sending close to fd 9, reason 5
smux: [smux_accept] peer on 9 failed authentication
As far as I read, there's nothing else I need to configure, so do you have
any idea of why this is not working??
Thanks,
Alejandro
On Tue, Jul 22, 2008 at 12:57 PM, Daniel Chuang <[EMAIL PROTECTED]> wrote:
> Alejandro Islas wrote:
>
> HI all, we recently installed quagga ripd in our linux servers in order to
>> enable rip protocol. I would like to monitor its behaviour using ripv2-mib.
>> I would like to know the steps I need to do to make it work. I did find the
>> RIP2-MIB file in my mibs directory but when I try a snmp walk command I
>> receive the following.
>> snmpServer:/etc/snmp# snmpwalk -v 1 -c public 10.25.1.1 <
>> http://10.25.1.1> Rip2IfStatEntry
>> Rip2IfStatEntry: Unknown Object Identifier (Sub-id not found: (top) ->
>> Rip2IfStatEntry)
>>
>
> you have to use either -m and -M option or environment variables to include
> you mib files.
>
> Also rip mib must be enabled in the quagga ripd too.
>
> thanks,
> Daniel
>
> So I guess there's something missing in my snmpd configuration to enable
>> rib2mib, or something at compilation time??? Could someone give some
>> workaround for this??
>> Thanks in advance,
>> Alejandro
>>
>> ------------------------------------------------------------------------
>>
>> -------------------------------------------------------------------------
>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>> challenge
>> Build the coolest Linux based applications with Moblin SDK & win great
>> prizes
>> Grand prize is a trip for two to an Open Source event anywhere in the
>> world
>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Net-snmp-coders mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
>>
>>
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
