Hi,
I'm trying to use NET-SNMP.
I finished compiling and generated "snmpd". But i failed to run snmpd.
It indicate that i should configue snmpd.conf again. In snmpd.conf,
there is access control information. I don't why. Can you help me?
Thanks a lot.
The following is the error inforation and snmpd.conf.
Error information:
whitehat /home/wangbh/net-snmp-5.4.2.1/sbin>./snmpd -f -Lo
Warning: no access control information configured.
It's unlikely this agent can serve any useful purpose in this state.
Run "snmpconf -g basic_setup" to help you configure the snmpd.conf
file for this agent.
Error opening specified endpoint ""
Server Exiting with code 1
Snmpd.conf:
########################################################################
###
#
# snmpd.conf
#
# - created by the snmpconf configuration program
#
########################################################################
###
# SECTION: Access Control Setup
#
# This section defines who is allowed to talk to your running
# snmp agent.
# rwuser: a SNMPv3 read-write user
# arguments: user [noauth|auth|priv] [restriction_oid]
rwuser testuser noauth public
# rouser: a SNMPv3 read-only user
# arguments: user [noauth|auth|priv] [restriction_oid]
rouser testrouser noauth public
# rocommunity: a SNMPv1/SNMPv2c read-only access community name
# arguments: community [default|hostname|network/bits] [oid]
rocommunity TEST2COMMUNITY
# rwcommunity: a SNMPv1/SNMPv2c read-write access community name
# arguments: community [default|hostname|network/bits] [oid]
rwcommunity TESTCOMMUNITY
########################################################################
###
# SECTION: System Information Setup
#
# This section defines some of the information reported in
# the "system" mib group in the mibII tree.
# syslocation: The [typically physical] location of the system.
# Note that setting this value here means that when trying to
# perform an snmp SET operation to the sysLocation.0 variable will
make
# the agent return the "notWritable" error code. IE, including
# this token in the snmpd.conf file will disable write access to
# the variable.
# arguments: location_string
syslocation "right here"
# syscontact: The contact information for the administrator
# Note that setting this value here means that when trying to
# perform an snmp SET operation to the sysContact.0 variable will make
# the agent return the "notWritable" error code. IE, including
# this token in the snmpd.conf file will disable write access to
# the variable.
# arguments: contact_string
syscontact Me
# sysservices: The proper value for the sysServices object.
# arguments: sysservices_number
sysservices 77
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
