2009/5/6 崔适男 <[email protected]>: > my snmp version is 5.1.3
That is a very old version, and is no longer being supported. We suggest you upgrade. > when i try to > > snmpset -v2c -c public localhost .1.3.6.1.2.1.4.21.1.3.1 i 4 > /*(this is the second ip table)*/ What do you see if you run a "snmpget" on the same OID? Note that you cannot create a new entry in this table. You can only tweak the settings for an existing row. Also, what are the access control settings for the agent? Normally, the community "public" cannot perform SET requests (unless you've explicitly configured this (which is a bad idea)). > Error in packet. > Reason: noCreation (that table does not support row creation) > Failed object: RFC1213-MIB::ipRouteMetric1.1 > > what's the problem What O/S are you working with? Dave ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
