Hi, Dave It works! Many thanks. kang
-----邮件原件----- 发件人: [email protected] [mailto:[email protected]] 代表 Dave Shield 发送时间: 2009年5月13日 15:47 收件人: Kang Chen 抄送: [email protected] 主题: Re: how to configure and use 'context'? 2009/4/30 Kang Chen <[email protected]>: > I try to use the function of ‘context’, but failed. > > In snmpd.conf, I configure as following: > > access Groupv3 "interface" usm auth exact if2 if2 if2 Sorry for the delay in getting back to you on this. I've finally managed to identify the problem - and it lies with the configuration line above. Try removing the quotes round the name of the context. The line access Groupv3 interface usm auth exact if2 if2 if2 should work successfully. Dave ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
