Hi,
I have two mibs that I are extended with "dlmod xxx" in the snmpd.conf. I could
display those two mibs if specifying them directly on the command line.
However, if I do a snmpwalk like:
snmpwalk -v 2c -c public 127.0.0.1
I only see some of the standard mibs, but not the two mibs that I linked in.
Also, I found the same behavior on UCD-SNMP-MIB, i.e.
snmpwalk -v 2c -c public 127.0.0.1 1.3.6.1.4.1.2021 would show the whole
UCD-SNMP-MIB, but
snmpwalk -v 2c -c public 127.0.0.1would not.
Is this expected behavior ?
Thanks,
Phong
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
