On Wed, 29 Feb 2012 12:36:27 +0000 Dave wrote: DS> On 29 February 2012 12:25, Zeljko Mihelcic <[email protected]> DS> wrote: DS> > Thanks for the command, but this is not what I'd like to have.... DS> > Namely, on the client side is received: DS> > DS> > "......neta4-pm:/home/easfsc# tcpdump -nnr traps40.pcap DS> > reading from file traps40.pcap, link-type EN10MB (Ethernet) DS> > 10:39:20.740420 IP 10.140.20.71.56185 > 10.140.20.69.162: V2Trap(251) DS> DS> > Note: IP 10.140.20.71.56185 is Agent's IP !!! DS> DS> DS> Have you tried using the 'clientAddr' directive (either within the DS> client-side ~/.snmp/snmp.conf file, or using --clientaddr=10.93.50.111)
I tried this... unfortunately you can only specify an address for which you have an interface configured... If he wants to simulate 100 devices, he'd have to configure 100 aliases on an interface. ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
