still it is not working. /root>snmpwalk -v 3 -u ravi -l authNoPriv -a MD5 -A mypass 192.168.2.11 .1.3.6.1.2.1.1 snmpwalk: Unknown engine ID
moreover createuser commands is not getting replaced by key in persistent snmpd.conf after restarting snmpd (as per snmpv3 documentation). createUser ravi MD5 mypass thanks........ On Mon, Mar 19, 2012 at 8:29 PM, Robert Story <rst...@freesnmp.com> wrote: > On Sun, 18 Mar 2012 13:39:47 +0530 Ravi wrote: > RK> Hi all, > RK> > RK> I have created snmpv3 user from the following command > RK> > RK> snmpget -v 3 -u ravi -l authNoPriv -a MD5 -A abcdefghij localhost > RK> sysUpTime.0 > RK> > RK> when i try to snmpget after starting snmpd i found following unknown > RK> engine id error > RK> > RK> /root/software/net-snmp>snmpget -v3 -u ravi -l authNoPriv -a MD5 -A > RK> abcdefghij localhost sysUpTime.0 > RK> snmpwalk: Unknown engine ID (Sub-id not found: (top) -> sysUpTime) > > Mibs might not be loaded correctly.. try using the OID directly: > > snmpget -v3 -u ravi -l authNoPriv -a MD5 -A abcdefghij \ > localhost .1.3.6.1.2.1.1.3.0 > > Then check out the FAQs on the net-snmp web site on how to configure net-snmp > to load mibs... ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Net-snmp-coders mailing list Net-snmp-coders@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
