On 9/30/18, Bart Van Assche <bvanass...@acm.org> wrote:
> On 9/30/18 1:26 PM, Mark Christiansen wrote:
>> Lee, thanks for the sanity check. When I run the same command as you I
>> get:
>>
>> $ /c/usr/bin/snmpwalk -v 2c -c demopublic test.net-snmp.org
>> <http://test.net-snmp.org> system
>> Timeout: No Response from test.net-snmp.org <http://test.net-snmp.org>
>>
>> I must have some problem with my build configuration.
>
> Please check with wireshark or tcpdump what is going on. I also get a
> timeout when I run the above command because the following has been
> enabled in the firewall of my DD-WRT router: "Block WAN SNMP access".

That's ... interesting.  I can see blocking traffic to udp port 161 &
162 coming in, but going out?   Unless you're running some kind of
snmp polling app & are worried about leaking your community strings.

Lee


_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders

Reply via email to