On 8/27/19 6:45 AM, Bill Fenner wrote:
diff --cc man/snmpd.conf.5.def index eaa904f4b0,eaa904f4b0..43ca58f3ce --- a/man/snmpd.conf.5.def +++ b/man/snmpd.conf.5.def @@@ -851,9 -851,9 +851,9 @@@ can configure \fIsnmpd\fR to take a mor defines the default community string to be used when sending traps. Note that this directive must be used prior to any community-based trap destination directives that need to use it. --.IP "trapsink [-profile p] [-name n] [-tag t] HOST [COMMUNITY [PORT]]" --.IP "trap2sink [-profile p] [-name n] [-tag t] HOST [COMMUNITY [PORT]]" --.IP "informsink [-profile p] [-name n] [-tag t] HOST [COMMUNITY [PORT]]" ++.IP "trapsink [-profile p] [-name n] [-tag t] [-s src] HOST [COMMUNITY [PORT]]" ++.IP "trap2sink [-profile p] [-name n] [-tag t] [-s src] HOST [COMMUNITY [PORT]]" ++.IP "informsink [-profile p] [-name n] [-tag t] [-s src] HOST [COMMUNITY [PORT]]" define the address of a notification receiver that should be sent SNMPv1 TRAPs, SNMPv2c TRAP2s, or SNMPv2 INFORM notifications respectively. See the section @@@ -880,6 -880,6 +880,16 @@@ be used for SNMP-NOTIFICATION-MIB tabl which notification filter profile entry will be used for filtering outgoing notifications. (See \fInotificationFilter\fR) .IP ++The optional src parameter specifies the source address that will ++be used when sending the trap packet to this sink. ++It is specified as a <transport-address>, using the same ++<transport-specifier> as the destination HOST. ++See the section ++.B LISTENING ADDRESSES ++in the ++.I snmpd(8) ++manual page for more information about the format. ++.IP If several sink directives are specified, multiple copies of each notification (in the appropriate formats) will be generated. @@@ -888,7 -888,7 +898,7 @@@ It is \fBnot\fR normally appropriate to list two (or all three) sink directives with the same destination. .RE --.IP "trapsess [-profile p] [-name n] [-tag t] [SNMPCMD_ARGS] HOST" ++.IP "trapsess [-profile p] [-name n] [-tag t] [-s src] [SNMPCMD_ARGS] HOST" provides a more generic mechanism for defining notification destinations. .I "SNMPCMD_ARGS" should be the command-line options required for an equivalent
This looks good to me. Thanks, Bart. _______________________________________________ Net-snmp-coders mailing list Net-snmp-coders@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
