Richard DeWath wrote:
I am new to snmp and have the net-snmp install
working, but I need to be able to check the RAID array
for the PE 2650 PERC 3/Di. I have checked at DELL and
what they have is a list of MIBS that they say to
compile. Other things I found at the site such as
percsnmp rpm does not include this Adaptec controller.
I checked at Adaptec and concluded that both DELL and
Adaptec point to the MIB aac.mib. So, I am wanting to
compile this and have gone over the documentation, but
hope someone has already gone through the steps and
can advise me on what I need to do after mib2c is run
(I can do that now) but I am confused about any
additional programming to the source files. Any help
is appreciated as I need to get this working asap.
It sounds as if you want to *add* this MIB to the tools rather
than "compile" (in order to *implement*) it. See
http://www.net-snmp.org/FAQ.html#How_do_I_add_a_MIB_to_the_tools_
+Thomas
--
Thomas Anders (thomas.anders at blue-cable.de)
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Net-snmp-users mailing list
[EMAIL PROTECTED]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
