Hi Dave:
Thanks!
> What are the access settings on this system?
If you were asking the access control setup. It is "rocommunity genie"
> What happens if you start the agent afresh, and then try the following
>single command:
> snmpgetnext -r 0 -t 600 -v 2c -c public localhost ifNumber.0
> [You may need to adjust "localhost" and "public" to match your setup]
I will find a chance to load net-snmp 5.1.1 on that system and give it a try. I
don't own that
machine. I have to do it when the user is not doing some long time testing. I may be
able to
give it a try during the weekend.
> What is the output of "cat /proc/net/dev" on each of the two systems?
The one is crashed has the following -
******************************************************
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets
errs drop fifo colls carrier compressed
lo:693206684 3331049 0 0 0 0 0 0 693206684 3331049
0 0 0 0 0 0
eth0:158736799 481825 0 0 0 0 0 0 28378473 106531
0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0
eth2: 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0
******************************************************
The one isn't crashed has the following -
******************************************************
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets
errs drop fifo colls carrier compressed
lo:2820170752 24914549 0 0 0 0 0 0 2820170752
24914549 0 0 0 0 0 0
eth0:2950150199 59801931 0 0 0 0 0 3074 411637325
59377183 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0
******************************************************
Thanks,
Jim
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dave Shield
Sent: Tuesday, September 28, 2004 7:42 PM
To: Jim Su
Cc: Net-Snmp-Users
Subject: Re: snmpd crashed by snmpwalk
> I encountered one snmpd crashed due to the snmpwalk timeout at the
> "IF-MIB::ifNumber.0 ". All the values before IF-MIB were returned. But
> there is time out on IF-MIB.
What are the access settings on this system?
What happens if you start the agent afresh, and then try the following
single command:
snmpgetnext -r 0 -t 600 -v 2c -c public localhost ifNumber.0
[You may need to adjust "localhost" and "public" to match your setup]
> I ran the snmpwalk to another host. It went through okay.
> The two systems have different OS level of Linux.
What is the output of
cat /proc/net/dev
on each of the two systems?
Dave
-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Net-snmp-users mailing list
[EMAIL PROTECTED]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
