Dear Sir,

sir, Mr.DAVE sir, still not getting,

sir,sorry, i made some noteable words in all caps only for your convience to read i am sorry if it is troubling you.. and also had a numerical count in my subject for you to refer my previous mail easily.. if that too disturbs you.. i will stop doing that..

as you said i added the single line of code to the previous
"snmptrapd.c" file after the lines with "signal"
copy & paste from the "snmptrapd.c" file
===============================================
line number --390

#ifdef SIGHUP
RETSIGTYPE
hup_handler(int sig)
{
    reconfig = 1;
    signal(SIGHUP, hup_handler);
    signal(SIGPIPE, SIG_IGN);
}
#endif

line number --1132

signal(SIGTERM, term_handler);
signal(SIGPIPE, SIG_IGN);
#ifdef SIGHUP
signal(SIGHUP, hup_handler);
signal(SIGPIPE, SIG_IGN);
#endif
signal(SIGINT, term_handler);
signal(SIGPIPE, SIG_IGN);
==================================================

now there is no error after reception of trap.and also it is not running the "wimaxscript" a shell script program.now the "snmptrapd" is up to receive further commands.

what to do for executing the  "wimaxscript" program on reception of a trap???


SNMP V3 problem

sir, i am getting "Timeout: No Response from 172.29.5.102:1545" when i use my SNMP V 3" but works for snmp v2c.sir, I have done these all:

sir, i have included in the following directives inside the snmp.conf file (ie) /home/parthiban/.snmp/snmp.conf file i have added these
=======================================================================================
# SECTION: Default Authentication Options
defsecurityname  parthi
defsecuritylevel  authPriv
defauthpassphrase  "keytowimax"
defprivpassphrase  "keytowimax"
========================================================================================

and in agent part sir, i have included "createUser parthi MD5 keytowimax DES" inside the persistent stored snmpd.conf file (ie)/home/parthiban/perstore/snmpd.conf file

here is the copy & paste of the terminal
=========================================================================================
[EMAIL PROTECTED] net-snmp-5.2]$ snmpget -v 2c -c public 172.29.5.102:15
45 1.3.6.1.2.1.10.184.1.1.5.3.1.2.1
WMAN-IF-MIB::wmanIfBsControllerActionsResetSector.1 = INTEGER: 11
[EMAIL PROTECTED] net-snmp-5.2]$ snmpget -v 3 172.29.5.102:1545 1.3.6.1.
2.1.10.184.1.1.5.3.1.2.1
Timeout: No Response from 172.29.5.102:1545.
[EMAIL PROTECTED] net-snmp-5.2]$ snmpget -v 3 -l authPriv -u parthi -A "
keytowimax" -X "keytowimax" 172.29.5.102:1545 1.3.6.1.2.1.10.184.1.1.5.3.1.2.1
Timeout: No Response from 172.29.5.102:1545.
[EMAIL PROTECTED] net-snmp-5.2]$
============================================================================================

what else setting i have to make for getting SNMP V3 run???

sir, i consider you as my teacher, mentor for my project.. you can command me to try things to get done with the project.


with sincere thanks & love,
n.parthiban



Reply via email to