Hi,all
I used the following command and got the results:
# snmpwalk -v1 -c public localhost 1.3.6.1.2.1.2.2.1
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 16436
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifSpeed.1
= Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 10000000
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: 0:c:29:9f:35:9f
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2
= INTEGER: up(1)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifInOctets.1 = Counter32: 102978510
IF-MIB::ifInOctets.2 = Counter32: 48386609
IF-MIB::ifInUcastPkts.1
= Counter32: 1505977
IF-MIB::ifInUcastPkts.2 = Counter32: 394505
......
if i want to olny get the interface2-based varibles as follow:
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifSpeed.2 = Gauge32: 10000000
IF-MIB::ifPhysAddress.2
= STRING: 0:c:29:9f:35:9f
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifInOctets.2 = Counter32: 48386609
IF-MIB::ifInUcastPkts.2 = Counter32: 394505
......
how would i use the command"snmpwalk" ?
Thank you very much in advance.
_______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
