My Make is now
failing at
usr/bin/ld: cannot find -lelf
collect2: ld returned 1 exit status
make[1]: *** [snmpd] Error 1
make[1]: Leaving directory `/home/amit/netsnmp/net-snmp-5.3.1/agent'
usr/bin/ld: cannot find -lelf
collect2: ld returned 1 exit status
make[1]: *** [snmpd] Error 1
make[1]: Leaving directory `/home/amit/netsnmp/net-snmp-5.3.1/agent'
Please install the following rpm package
elfutils-devel-0.76-3.i386.rpm
Regards,
Sri.
*****************************************************************************************************************************************************************************************************************************
This e-mail, and any attachments thereto, are intended only for use by the addressee(s) named herein and may contain privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is illegal and strictly prohibited. If you have received this e-mail in error, please immediately notify me by telephone and permanently delete the original and any copy of any e-mail and any printout thereof.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Amit Gupta
Sent: Thursday, September 21, 2006 10:49 AM
To: net-snmp-users@lists.sourceforge.net
Subject: Re: Compilation Problem with 5.3.1
Hi Thomas,
Thanks for the response. I could move forward but still not able
to complete it,
My Make is now failing at
usr/bin/ld: cannot find -lelf
collect2: ld returned 1 exit status
make[1]: *** [snmpd] Error 1
make[1]: Leaving directory `/home/amit/netsnmp/net-snmp-5.3.1/agent'
I have checked the FAQ and created a soft link to the given library but still it fails.
Thomas, also can i compile the perl module without compiling the complete package
Below is perl -v output
perl -v
This is perl, v5.8.5 built for x86_64-linux-thread-multi
Copyright 1987-2004, Larry Wall
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using `man perl' or `perldoc perl'. If you have access to the
Internet, point your browser at http://www.perl.com/, the Perl Home Page.
and this is error on compiling perl module
[EMAIL PROTECTED] perl]# make
make[1]: Entering directory `/home/amit/netsnmp/net-snmp-5.3.1/perl/default_store'
gcc -c -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind
-tables -Dlinux -I/usr/include/rpm -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOU
RCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -I. -I/usr/include/net-snmp -D_REENTRANT -D_GNU_SOURCE -D
DEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -m64 -DVERSION=\"5.0
301\" -DXS_VERSION=\"5.0301\" -fPIC "-I/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi/CORE" default_store.c
cc1: error: unrecognized command line option "-fstack-protector"
cc1: error: invalid parameter `ssp-buffer-size'
default_store.c:1: error: CPU you selected does not support x86-64 instruction set
default_store.c:1: error: bad value (generic) for -mtune= switch
make[1]: *** [default_store.o] Error 1
make[1]: Leaving directory `/home/amit/netsnmp/net-snmp-5.3.1/perl/default_store'
make: *** [subdirs] Error 2
Regards
- Amit
| Thomas Anders
<[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 09/20/2006 02:31 PM
|
|
Amit Gupta wrote:
> I ahave just downloaded the Netsnmp 5.3.1 source code and trying to build
> it there on the Linux machine.
> [...]
> /usr/lib/libpopt.so: could not read symbols: File in wrong format
Looks like you're building on x86-64. Please use
LDFLAGS=-L/usr/lib64 ./configure ... && make
for building, then.
> and also when i try to compile only the perl module, i get the following
> error
>
> no-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET
> _BITS=64 -I/usr/include/gdbm -O2 -g -pipe -m64 -DVERSION=\"5.0301\"
> -DXS_VERSI
> ON=\"5.0301\" -fPIC
> "-I/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi/CORE"
> default_store.c
> cc1: error: unrecognized command line option "-fstack-protector"
> cc1: error: invalid parameter `ssp-buffer-size'
> default_store.c:1: error: CPU you selected does not support x86-64
> instruction s
> et
> default_store.c:1: error: bad value (generic) for -mtune= switch
> make[1]: *** [default_store.o] Error 1
> make[1]: Leaving directory
> `/home/amit/netsnmp/net-snmp-5.3.1/perl/default_store
Please give a full line of compiler options instead of the truncated one
above. What distro is this? What's the output of "perl -V"? Are you
using the same compiler (which version?) that has been used to compile
perl (you should)?
+Thomas
--
Thomas Anders (thomas.anders at blue-cable.de)
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
