OK, I got a little further. I replaced the authcommunity with
disableauthorization. Here is the trap I am receiving. Where am I
going wrong?
Host: <UNKNOWN> (UDP: [207.97.221.101]:45677)
DISMAN-EVENT-MIB::sysUpTimeInstance 0:0:00:00.00
SNMPv2-MIB::snmpTrapOID.0
WEBSITEPULSE-NOTIFY-MIB::WEBSITEPULSE-NOTIFY-MIB.0
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseAlertType "Simulation"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseDomain "test.domain.net"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseTargetLabel "Testlabel"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseDate "20040101000000"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseResponseTime Wrong Type
(should be INTEGER): "1.0000"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseSubscriberNames "Test Name"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseStatus "Simulation"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseDowntime "12"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseServerType "HTTP"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseUrl "http://www.yoursite.com";
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseStepNumber "6"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseStepLabel "Label Name"
WEBSITEPULSE-NOTIFY-MIB::WebSitePulseRuleName "Rule Name"
On Thu, Mar 27, 2008 at 12:50 PM, Terry <[EMAIL PROTECTED]> wrote:
> I am still following through with the sender. I want to double check
> the logic on my end. They are sending v2 traps. I have also loaded
> their mib into /usr/share/snmp/mibs. Here is my snmptrapd.conf:
>
> authCommunity log,execute,net public
> traphandle default /usr/bin/perl /usr/bin/traptoemail -s localhost -f
> [EMAIL PROTECTED] [EMAIL PROTECTED]
>
> And here is how I am starting snmptrapd while testing:
> snmptrapd -f -Le -d -M /usr/share/snmp/mibs -m ALL
>
> I have a question somewhat related to this. Can I accept traps for
> multiple communities somehow with a single snmptrapd daemon and have a
> different set of handlers for each? I just want to double check my
> work on my end while they are scratching their heads on their end.
>
>
> On Wed, Mar 26, 2008 at 10:12 AM, Dave Shield
>
> <[EMAIL PROTECTED]> wrote:
>
>
> > On 26/03/2008, Terry <[EMAIL PROTECTED]> wrote:
> > [snip]
> >
> > >
> > > Cannot find TrapOID in TRAP2 PDU
> >
> > Well, it's quite correct.
> >
> > The first two varbinds of a Trap2-PDU are meant to
> > be 'sysUptime.0' followed by 'snmpTrapOID.0'
> > The first two varbinds in this dump are
> > 'enterprises.22096.1.1.1' and 'enterprises.22096.1.1.4'
> > (assuming I've done the calculations correctly)
> >
> > That's the enterprise number for Image Project Inc.
> >
> >
> > It looks as if the generating application is broken.
> > I suggest you get onto the supplier and ask them
> > about this.
> >
> > Dave
> >
>
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
