Thomas Anders wrote: > Taymour A. El Erian wrote: > >> I have a running setup on RHEL 3, FreeRADIUS 1.1.7 and Net-SNMP 5.0.9 >> on i386 and I can monitor RADIUS correctly. I have created the same >> setup on RHEL 5.1, FreeRADIUS 1.1.7, Net-SNMP 5.3 on x86_64 and >> FreeRADIUS can not connect to SNMP (connection refused). I have tried >> building Net-SNMP 5.4 and still the same problem. >> > > Please try 5.4.1 which should work fine with FreeRADIUS as a SMUX subagent. > If it doesn't, what are the exact configuration settings and error messages > on both sides? > > > +Thomas > > I tried 5.4.1 before sending the email (sorry I forgot to say it is 5.4.1). I built it from the source (using your spec file) on RHEL 5.1 x86_64. It still does not work.
here is the output of radiusd -x module: Instantiated radutmp (radutmp) main: smux_password = "password" main: snmp_write_access = no SMUX connect try 1 SMUX open oid: 1.3.6.1.4.1.3317.1.3.1 SMUX open progname: radiusd SMUX open password: password SMUX register oid: 1.3.6.1.2.1.67.1.1.1.1 SMUX register priority: -1 SMUX register operation: 1 SMUX register oid: 1.3.6.1.2.1.67.2.1.1.1 SMUX register priority: -1 SMUX register operation: 1 SMUX register message send failed: Connection reset by peer snmp.conf smux_password = password snmpd.conf smuxpeer .1.3.6.1.4.1.3317.1.3.1 password -- Taymour A El Erian System Division Manager RHCE, LPIC, CCNA, MCSE, CNA TE Data E-mail: [EMAIL PROTECTED] Web: www.tedata.net Tel: +(202)-33320700 Fax: +(202)-33320800 Ext: 1101 ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
